1.) Prep fire pit

• Remove the metal lid covering the burner before operation.

• Ensure the burner control valve is in the off position.

2.) Ignite fire pit

• Slowly open the propane tank valve by turning it counterclockwise.​

• Push and hold the electronic ignitor to generate sparks within the electrode.​

• Push in the main control knob and rotate to the “HIGH” position, holding it for up to 15 seconds so gas flows properly.​

• If the burner does not ignite after several seconds, release the knob, turn to “OFF,” wait 5 minutes for gas to dissipate, and repeat lighting steps.​

• Once lit, adjust the flame by turning the control knob between “LOW” and “HIGH” settings. Please note that the flames can get very high, so it is not recommended to have turn the knob more than half way.

3.) Shutting off and cleaning

• To extinguish the fire, turn the control knob to “OFF” and close the valve on the propane tank.

• Replace the metal lid once the fire pit has fully cooled after use.​

Safety reminders

• Never leave a fire unattended.

• Keep combustibles and children away from the fireplace at all times.

• Never move fire pit at any time.

• Some surfaces will be hot during use.